new project runner bottom

S

soldier of fortune

New member
starting to mock up engine looks like i need a new rear mount made, the one that came with it mounts to the water pump holes, and wont work with the aluminum timing cover and water pump i have.
 

Attachments

  • IMG_0060.jpg
    IMG_0060.jpg
    1,008.4 KB · Views: 97
  • IMG_0061.jpg
    IMG_0061.jpg
    980.9 KB · Views: 66
  • IMG_0063.jpg
    IMG_0063.jpg
    620.5 KB · Views: 67
  • IMG_0064.jpg
    IMG_0064.jpg
    725.4 KB · Views: 75
S

soldier of fortune

New member
after the 1st of the year i will be taking the casale out and going to see beaver fab to see what is actually in the box, and probably add a prop release.
 
C

ChryslerJet

New member
soldier of fortune said:
starting to mock up engine looks like i need a new rear mount made, the one that came with it mounts to the water pump holes, and wont work with the aluminum timing cover and water pump i have.
Click to expand...
Can't wait to see it on the lake
 
S

sturat

New member
soldier of fortune said:
after the 1st of the year i will be taking the casale out and going to see beaver fab to see what is actually in the box, and probably add a prop release.
Click to expand...

Sounds like the best idea i have heard all day.
 
C

customtouch

Active member
Looks like you are getting a good plan together. Just curious, have you checked to see if the headers are going to clear the gas tank or are you going to run zoomies? By the pics it looks like OT's would be pretty tight.
 
D

Disturbed

Active member
customtouch said:
Looks like you are getting a good plan together. Have you checked to see if the headers are going to clear the gas tank or are you going to run zoomies? By the pics it looks like OT's would be pretty tight.
Click to expand...

I bet jet boat headers would fit.....  think.gif think.gif think.gif
 
C

customtouch

Active member
DISTURBED said:
customtouch said:
Looks like you are getting a good plan together. Have you checked to see if the headers are going to clear the gas tank or are you going to run zoomies? By the pics it looks like OT's would be pretty tight.
Click to expand...

I bet jet boat headers would fit.....  think.gif think.gif think.gif
Click to expand...

Hadn't thought of that. I bet the short jet headers would look cool on it but I am sure SOF has already figured something out.
 
G

galen

New member
Looking good, from those first pics I never would have thought it would clean up that nice. Going to be nice. Gives me incentive to shake off this winter depression and get to the garage.
 
S

soldier of fortune

New member
galen said:
Looking good, from those first pics I never would have thought it would clean up that nice. Going to be nice. Gives me incentive to shake off this winter depression and get to the garage.
Click to expand...
i live pretty far from ya but feel free to bring it down we can work on it in my shop or I can for free
 
S

soldier of fortune

New member
except for a few places it cleaned up okay, floor needs to be redone either flow coat or gel coat or splatter coated, yesterday i replaced about 20 cav plate bolts in the center, still got 6 more in the center plate and 20 in the outer plates to replace, that will mean either raising the back off the trailer or scooting the boat back. i also got the tank mounted in the spot i think it needs to be at, should have enough room for the blower snout i hope. still gotta make a new rear mount, or make a new timing cover that will work with this plate.
 

Attachments

  • IMG_0080.jpg
    IMG_0080.jpg
    651.9 KB · Views: 121
  • I-Don-t-Roll-on-Shabbos.png
    I-Don-t-Roll-on-Shabbos.png
    38.5 KB · Views: 121
C

customtouch

Active member
The tank looks 100% better now.  :smile17: I just spoke too soon.  :smile23: Looks like it is coming together nice!  clap.gif
 
You must log in or register to reply here.
Top