KONA has a new project - we will call it Project "V"

[Disturbed]

Hey, at least it is washed! It looks cool! Good job Rog or Ryan, probably really the credit should go to Leanne! :evil: :grin:

:smile30:

 

[Knotty Girl]

He did actually sand on it, or someone did.  I saw I saw.  :smile27:

 

[KONA77]

jump.gif......

 

[Devilman]

In all seriousness, ya gotta start somewhere. You have bridged that gap, hope the motivation keeps it going for ya.  :wink:

When you do start workin on it, let us know. Me & Carole will come over & drink some drinks & watch.  :grin:

 

[Patchman]

In all seriousness, ya gotta start somewhere. You have bridged that gap, hope the motivation keeps it going for ya.  :wink:

When you do start workin on it, let us know. Me & Carole will come over & drink some drinks & watch.  :grin:

Yes, I will drink and watch and eat your food! Sounds like a great time! think.gif

 

[KONA77]

bring sand paper,  and i'll cook while yall sand,  that'll get your appetite up  :smile16:

 

[spd500]

Just get a big ass compressor and a DA sander , you will be sanded in no time . But that is just the beginning of all the hard work , then you gotta start getting it ready to paint  :smile30:

 

[KONA77]

Just get a big A$$ compressor and a DA sander , you will be sanded in no time . But that is just the beginning of all the hard work , then you gotta start getting it ready to paint  :smile30:

what size of compressor and brand would you recommend?

 

[Knotty Girl]

Just get a big A$$ compressor and a DA sander , you will be sanded in no time . But that is just the beginning of all the hard work , then you gotta start getting it ready to paint  :smile30:

what size of compressor and brand would you recommend?

You have a compressor, just go to Northern Tool and get a DA, oh and do not forget to buy the paper to go with it.  :smile16:

 

[spd500]

It really depends on what all you are going to do with it . If you are going to paint with it you will need to look at the needs of the paint gun you plan to use . Most guns need close to 10 cfm to spray correctly . Alot of the big compressors you see now have smaller pumps on them with a big tank . I bought mine on Craigslist for fairly cheap , it's an older model but it has a big enough pump to get the job done . I have also seen people setup to run two smaller compressors in a tandem setup for painting if they don't have a large one . I have sanded with a small compressor before , you just have to take more breaks from sanding to keep from burning up the compressor , but it does allow time for a cold beverage . There are  alot of people here who know alot more than me about body and paint work , maybe they will chime in . Do you have a compressor at all ? What are the specs if so ?

 

[spd500]

Just get a big A$$ compressor and a DA sander , you will be sanded in no time . But that is just the beginning of all the hard work , then you gotta start getting it ready to paint  :smile30:

what size of compressor and brand would you recommend?

You have a compressor, just go to Northern Toll and get a DA, oh and do not forget to buy the paper to go with it.  :smile16:

You can get a cheap DA from Northern , Harbor Freight , I even saw one at walmart a few weeks ago .

 

[Knotty Girl]

If you need a compressor I have one you can borrow.

 

[Disturbed]

I think Kona is pulling your chain a little.  He has a fairly large compressor if I remember correctly...  think.gif

 

[spd500]

I think Kona is pulling your chain a little.  He has a fairly large compressor if I remember correctly...  think.gif

Well , then get to work ! You should be done by now  hurry.gif

 

[Devilman]

I think Kona is pulling your chain a little.  He has a fairly large compressor if I remember correctly...  think.gif

Ya I would imagine so.  :wink: He has to supply air to the buried bus somehow. :cheesy:

 

[Patchman]

I think Kona is pulling your chain a little.  He has a fairly large compressor if I remember correctly...  think.gif

Ya I would imagine so.  :wink: He has to supply air to the buried bus somehow. :cheesy:

:grin:

 

[Knotty Girl]

I think Kona is pulling your chain a little.  He has a fairly large compressor if I remember correctly...  think.gif

I was positive I saw one in the shop.  He suckered me on that one.  That's what I get for trying to be a nice guy.  crazy.gif

 

[blazeracer]

Probably sold his compressor to buy the boat this thread is about!!

 

[KONA77]

my compressor is worth way more than this boat at the present  :grin:  but give Kona some time and that will change  :smile16:

 

[spd500]

my compressor is worth way more than this boat at the present  :grin:  but give Kona some time and that will change  :smile16:

Well , get to work . You should have it sanded by now if you got the tools  :smile30: