Chrysler Conqueror SIII with Chrysler Jet

B

blazeracer

New member
keep-on-truckin.jpg
 
O

oldbuck40

Active member
DISTURBED said:
I would put the cap back on it next, before cutting any new holes for whatever pump you install.  My $.02
Click to expand...
think.gif Good idea! Because we all know it may sit a little longer and start to warp!
 
D

Disturbed

Active member
oldbuck40 said:
DISTURBED said:
I would put the cap back on it next, before cutting any new holes for whatever pump you install.  My $.02
Click to expand...
think.gif Good idea! Because we all know it may sit a little longer and start to warp!
Click to expand...

May not want to put anymore effort into it if, it doesn't go back together.
 
C

ChryslerJet

New member
Cap was going to go back on tonight but have to postpone that until  tomorrow.  It's not going to sit much longer.  Something had to give and  now shit is going to get done.  I think I am finally out of my slump I  feel like I can work on things where they are now besides need to get  some of this stuff done and mobile cause I am looking at moving and find  a place with a little more work area, but can't do that while I have  all these projects torn down.
 
Crusader

Crusader

Moderator
Hope your new neighbors don't drink as much beer as the ones you have now. That should help with time when it comes to cleaning out the hull again...

How money recycling $$ you make off that last haul??


Lol
 
C

ChryslerJet

New member
Crusader said:
Hope your new neighbors don't drink as much beer as the ones you have now. That should help with time when it comes to cleaning out the hull again...

How money recycling $$ you make off that last haul??


Lol
Click to expand...

Funny Cliff plans are to have enough room to not worry about the neighbors and not have a bipolar landlord. 

I got a serious question for you though when you redid your boat how much resin from areomarine did you use?
 
M

Michael Swindoll

New member
ChryslerJet said:
Cap was going to go back on tonight but have to postpone that until  tomorrow.  It's not going to sit much longer.  Something had to give and  now s*** is going to get done.  I think I am finally out of my slump I  feel like I can work on things where they are now besides need to get  some of this stuff done and mobile cause I am looking at moving and find  a place with a little more work area, but can't do that while I have  all these projects torn down.
Click to expand...

I thought you just moved?
 
Crusader

Crusader

Moderator
ChryslerJet said:
Crusader said:
Hope your new neighbors don't drink as much beer as the ones you have now. That should help with time when it comes to cleaning out the hull again...

How money recycling $$ you make off that last haul??


Lol
Click to expand...

Funny Cliff plans are to have enough room to not worry about the neighbors and not have a bipolar landlord. 

I got a serious question for you though when you redid your boat how much resin from areomarine did you use?
Click to expand...

About 2 1/2 gallons... That was for coating of the stringers, six layers of mat on the stringers, coating both sides of the marine plywood deck to include the edges, and also to coat the entire top of the deck with mat and two coats of resin.
 
C

ChryslerJet

New member
Crusader said:
ChryslerJet said:
Crusader said:
Hope your new neighbors don't drink as much beer as the ones you have now. That should help with time when it comes to cleaning out the hull again...

How money recycling $$ you make off that last haul??


Lol
Click to expand...

Funny Cliff plans are to have enough room to not worry about the neighbors and not have a bipolar landlord. 

I got a serious question for you though when you redid your boat how much resin from areomarine did you use?
Click to expand...

About 2 1/2 gallons... That was for coating of the stringers, six layers of mat on the stringers, coating both sides of the marine plywood deck to include the edges, and also to coat the entire top of the deck with mat and two coats of resin.
Click to expand...
Okay thanks, I bought 3 gallons and almost used half of it in the transom so guess I am going to have to buy some more resin.
 
C

ChryslerJet

New member
Mike S said:
ChryslerJet said:
Cap was going to go back on tonight but have to postpone that until  tomorrow.  It's not going to sit much longer.  Something had to give and  now s*** is going to get done.  I think I am finally out of my slump I  feel like I can work on things where they are now besides need to get  some of this stuff done and mobile cause I am looking at moving and find  a place with a little more work area, but can't do that while I have  all these projects torn down.
Click to expand...

I thought you just moved?
Click to expand...
Mike no didn't move want to move and looking for a place trying to get financed on our own.  I did just rearrange quite a bit and have to reorganize the boats stored locations and such cause of the bipolar landlord.  I have been paying this guy rent for 8 years done all the repairs/upgrades to this place like replacing the carpets in the bedrooms, laminate flooring in the living room and now a complete renovation of the bathroom and he wants to complain about little sh!t.
 
C

ChryslerJet

New member
Mike S said:
Sounds like you need to stop putting money in it then! and more in your own place!!
Click to expand...
Yeah I have reached that point although if you know me it didn't cost me a lot but that's not the point.  I am to the point that ... Well I better not say it this being the internet and all that.

I am very glad I took a day off yesterday though and made some major progress on the CJ.  Won't be long now before I will be ready for the Bulkheads and stringers.
 
You must log in or register to reply here.
Top