73 Sanger Flat
Active member
Steel Creek June 2nd -- The weather is going to be Hot , but the water should still be cool .. Come out and play for the day on Saturday .
Steel Creek June 2nd
- Thread starter 73 Sanger Flat
- Start date
73 Sanger Flat
Active member
no excuses -- better be on the water .. That is for everyone that is close to Stel Creek ..
Rusty Shackelford
New member
Jimmy are you putting yours in the water?
Rusty Shackelford said:
TROLL
Mr. Shackleford, or whatever your name might be, just 5 posts in and already you find it desirable to harass and talk shit towards me just as you do on facebook. I ask you nicely there to back off with your repeated crap, but you apparently don't get it.
I don't think you'll find it's tolerated here very well.
What part of, "Suggestion noted, and understood," did you not understand?
Perhaps you will create numerous screen names as you did on facebook, as you were being removed there.
Rusty Shackleford appears to use numerous facebook pages showing different cities, no personal information but using the same images.
What a jerk.
73 Sanger Flat
Active member
Jim - you know I am just giving you a hard time .. I know what your boat will run . I have seen it run a lot of times and have the utmost respect for your boat .. I can only wish my boat would run as good as yours ..
jimsplace said:
Rusty Shackelford
New member
jimsplace said:
Did you sniff to much glue as a kid?
Trying to get the Schiada ready, motor is ready thanks to EO, I been working on the boat. My last post was me working on the floor. I repaired the floor and regell the center section, then sanded it with 600, 1000, 1500, 2000 and then 3000 grit sandpaper. Then buffing and final polished the floor. Next I went to work on the parkey floor buffing and polisheing.
Now the boat is ready I start on the gast tanks, cleaning, and sanding then buffing with angle buffer, and a final polish. While this was going on I started on all the aluminum parts cleaning and buffing. This if finally done next it putting it all back in, I have around 20 hours in the polishing of aluminum parts and around 40 hours in the floors and gas tanks. Only 4 days left hope I make it.
Now the boat is ready I start on the gast tanks, cleaning, and sanding then buffing with angle buffer, and a final polish. While this was going on I started on all the aluminum parts cleaning and buffing. This if finally done next it putting it all back in, I have around 20 hours in the polishing of aluminum parts and around 40 hours in the floors and gas tanks. Only 4 days left hope I make it.
Attachments
73 Sanger Flat
Active member
Looking Good .. bling.gif bling.gif
73 Sanger Flat
Active member
Who all is going to Steel Creek this Saturday .. I know Trey has to work , Jim , Rocky and Neil, I think already have plans .. Hell I might have the fastest boat there if all the fast boats stay at home .. It's going to be HOT 102* to 105* is what they are predicting .. I will be staying at the ramp area under the trees for sure .. We have some family coming down also , so we need to stay close to the ramp anyway ..
Knotty Girl
New member
Looks good JJ
73 Sanger Flat
Active member
OK -- I am not going to go to Steel Creek Saturday .. I have a stomach bug or something .. So will catch everyone the next time ..
ChryslerJet
New member
Brazos River Rat ( Billy ) said:
What happened to no excuses?
Did not get my boat finished so I took the day off and meet Pall and his son JT for a boat ride. We put in at Kimble and went upriver, all the way to the island, yes the island did not think there was enough water in the river but we made it. The water was around 5’ deep at its deepest. For those of you who have never been upriver from Kimble you are missing a trifecta ride.
