R/C Raptor 30 Helicoptor

KONA77

New member
ran into a snag,  but got it worked out,  this heli came with a gyro,  that has two modes,  normal,  and headlocking,  well the instructions were wrong on the initial setup,  and i had trouble getting it set up to headlocking,  got that understanding worked out..... 


if there was a headache smiley,  i could certain use it to describe the setup on this heli  :smile16:
 

Disturbed

Active member
Patchman said:
think.gif He mite be right! think.gif

Ain't gonna lie.  Busted a few sticks of Balsa in my time.....

The last couple weren't my fault!  Crappy radio equipment/battery...  But, I pitched both after the Reactor went haywire.  :grin:
 

Becket

New member
DISTURBED said:
KONA said:
lol,  a poor worksmen blames his tools  :grin:
crazy.gif

Look up.  Chances are, the planes I work on are flying directly overhead!  :grin:
Damn! I don't know if I should be nervous or what!    I fly halfway around the world twice a month!  :smile20:
 

Patchman

Administrator
Staff member
Kona and Disturbed talking about who crashes what! That's like the pot calling the kettle black! clap.gif :grin:
 

KONA77

New member
i received the hex drive for my starter for the heli,  also have the remote adapter for the glow plug,  not happy with that,  to short to make it to where i wanted to mount it,  and the end that goes on the glow plug is not insulated
 

77Jet Star

Active member
KONA said:
i received the hex drive for my starter for the heli,  also have the remote adapter for the glow plug,  not happy with that,  to short to make it to where i wanted to mount it,  and the end that goes on the glow plug is not insulated
If you want the right stuff check out  heli proz they have it all  :smile13:
 

KONA77

New member
JETSTAR said:
KONA said:
i received the hex drive for my starter for the heli,  also have the remote adapter for the glow plug,  not happy with that,  to short to make it to where i wanted to mount it,  and the end that goes on the glow plug is not insulated
If you want the right stuff check out  heli proz they have it all  :smile13:


well it's the option for the raptor by part # 

i'm beginning to loose faith in thunder tiger products
 

77Jet Star

Active member
KONA said:
JETSTAR said:
KONA said:
i received the hex drive for my starter for the heli,  also have the remote adapter for the glow plug,  not happy with that,  to short to make it to where i wanted to mount it,  and the end that goes on the glow plug is not insulated
If you want the right stuff check out  heli proz they have it all  :smile13:


well it's the option for the raptor by part # 

i'm beginning to loose faith in thunder tiger products
They make a good heli I just dont like the pre assembled kits they seem to give you the  options they want.I have always built mine and picked my engine,gyro,muffler radio,etc.I think you have probably rebuilt  this one anyway.I sure it will be fine.Hang in there.My advise is to just keep it light on the skids  for a while.Then try to just hover around no forward fight for a while stay in ground effect and no nose in .Just my .02 good luck  :smile17:
 

KONA77

New member
thanks Jetstar,  definitely will follow that flight plan,  i have not fired it up yet,  was waiting on theses other parts, i was looking at the other brand of remote glow adapters and they are also 6" long so i cannot use them to get it to the location i wanted,  i'll just have to make it work,  but i did wish it had a insulated cap on it.


i did tell ya about that DVD training video i purchased from AMA on heli flight,  when i had gotten my Blade CP Pro electric??

lot of good info
 

Patchman

Administrator
Staff member
I think you should take lots of video and keep us posted on the progress. Or you could wait till we are all there before you fly it! That way we could be your moral support crew! :smile16:
 
Top