Project Liberator

[WAFOBABY]

ITs going to look look and I have a pretty good feeling  :smile30:  it GOING TO FLY!!!  keep the pics coming..   

 

[Knotty Girl]

If you plan on racing it in the SDBA you will need a drive shaft cover.  I know they stopped me from running one time because of it.

 

[Patchman]

If you plan on racing it in the SDBA you will need a drive shaft cover.  I know they stopped me from running one time because of it.

I thought they stopped you because of the bailing wire and the duct tape! :smile26: :smile28:

 

[Knotty Girl]

Like they say you can take the boy out of the country but you cannot take the country out of the boy!

 

[Patchman]

Like they say you can take the boy out of the country but you cannot take the country out of the boy!

Right! clap.gif :grin:

 

[Shrek]

If you race in SDBA you will also need a harmonic balancer shield.

 

[Knotty Girl]

I forgot about that.  Plus it was 20+ years ago I ran.

 

[jdeaton]

You have to have one for River Racer??  No, Come On.  Somebody check the rules, I plan on running the 126 MPH River racer class,  HA HA.

 

[73 Sanger Flat]

This is only if you have a two piece balancer ( like a stock balancers ) , if you have a SFI approved balancer you do not need the shield .

Page 65 section 8.21

 

[jdeaton]

Great the race is on!!

 

[jdeaton]

Progress: First glass beader work  Pic #1 inlet pipe 1/2 done
                                                Pic #2 inlet pipe all done
                                                Pic #3 water inlet pressure relief manifold
I love my glass beader

 

[jdeaton]

More progress: This time with my Craftman buffer, I'll probably upgrade to a Professional grade buffer later.  This one tends to get a little warm, you have to buff awhile then go do something else, while it cools
This is one rail, the rear motor plate, and the drive shaft cover.  Last picture is the finished product waiting for a good coat of Mothers to bring out the shine.

 

[jdeaton]

boat bottom (Bilge area)  before and after. Started working on the Liberator at 8:00 Am
And the final picture, taken at 8:00 PM

 

[Disturbed]

Looking good!  clap.gif

 

[Patchman]

I guess the next big question would be does it start? think.gif

 

[73 Sanger Flat]

Glad you got it back in , hopefully the problem is fixed and it will be the last time you need to pull it this year ..

 

[Knotty Girl]

Very impressive  clap.gif

 

[duanehydro]

boat bottom (Bilge area)  before and after. Started working on the Liberator at 8:00 Am
And the final picture, taken at 8:00 PM

Showoff! :smile28:

 

[jdeaton]

I do know the starter works. The spark chaser will be here Saturday to hook up the wires I cut, I'm not allowed to touch his work.  The motor will come out this winter, so I can flip the hull, and repair the trailer.

 

[Crusader]

Jim, you got her finished just in time to bring it to Lavon tomorrow for our Season Opener!!!!!!!!!!