New day cruiser project

[Last Mohecian]

Matt. If the curved lever on the left side of the picture is your shifter lever, you can flip the 180 degrees.

But things are usually never that easy. Lol

I bet it is and I bet it is that easy.

 

[Crusader]

Cool. I hope it is that easy. Lol.

 

[Last Mohecian]

It is that cable or the one hiding behind it.  Either way, I'm sure it is just a matter of flipping the correct arm.

 

[Gold Member]

Which boat are bringing Sunday Matt?

 

[Last Mohecian]

Which boat are bringing Sunday Matt?

The Rebel.

 

[Gold Member]

I figured. Good I Like hearing that pontiac!

 

[blazeracer]

That's the exact shifter my Glastron has, but built the other way for boat side drive. The left lever is the throttle and thr right lever is the reverse gate. As long as there an attachment point for the morse cable locking bracket it can be flipped. I'm gonna swing by and look at mine cause it's out right now.

 

[Last Mohecian]

That's the exact shifter my Glastron has, but built the other way for boat side drive. The left lever is the throttle and thr right lever is the reverse gate. As long as there an attachment point for the morse cable locking bracket it can be flipped. I'm gonna swing by and look at mine cause it's out right now.

Take a picture of the back of it.  If I can see what the back looks like I think I may can flip the arm without removing the entire thing.

 

[blazeracer]

Here you go. First pic is of how it rides in my boat. Second pic is the lever and morse cable bracket flipped. It will work, but you may have to take it off to flip the lock bracket.

 

[Last Mohecian]

Here you go. First pic is of how it rides in my boat. Second pic is the lever and morse cable bracket flipped. It will work, but you may have to take it off to flip the lock bracket.

Ahhh.  Now I see.  Thanks James. 

 

[jdeaton]

Send the expulator into the denataionator, this will expell the urinator into the lakeavator thus expelling the resonator for the fragmator.  I hope this expains the shituation, maybe.

 

[blazeracer]

Mine's set up as a pusher for the reverse gate and a puller for the throttle. Glad I was able to help you for a change... LOL

 

[Knotty Girl]

Send the expulator into the denataionator, this will expell the urinator into the lakeavator thus expelling the resonator for the fragmator.  I hope this expains the shituation, maybe.

crazy.gif  I have a headache now!

 

[Crusader]

Send the expulator into the denataionator, this will expell the urinator into the lakeavator thus expelling the resonator for the fragmator.  I hope this expains the shituation, maybe.

I think this is what Jim is trying to say.....lol.

http://www.youtube.com/watch?v=RXJKdh1KZ0w

 

[Knotty Girl]

I followed everything he said  crazy.gif

 

[blazeracer]

Send the expulator into the denataionator, this will expell the urinator into the lakeavator thus expelling the resonator for the fragmator.  I hope this expains the shituation, maybe.

I think this is what Jim is trying to say.....lol.

http://www.youtube.com/watch?v=RXJKdh1KZ0w

That's some funny stuff there.

 

[Last Mohecian]

The cruiser officially has reverse again.  Unlike James' control where you had to move the clip, mine had two clips made into it.  They are the kind that have the latch that just rotates over the cable.  All I had to do is remove one screw, unlock one clamp, flip the linkage with the cable still attached, reinstall the cable in the other clamp and replace the screw.  Took all of 5 minutes and that included me removing 3 wood screws and a set screw that did not need to come out.  Works perfect now.

Next project is fixing the leaking fuel tank that I already removed.  Hopefully I can get that done next week.  Once the tank is reinstalled it's on to the seat install.

 

[Last Mohecian]

As much as I hated to do it I cut the back out of my new rear seat tonight.  It was just too tight between the front and rear seats.  By cutting a hole to clear the alternator and front pulley I was able to move the rear seat back another 6 inches.  It made all the difference.  The seats fit nicely now. This thing is going to have a huge rear deck.  It ain't much but it is progress.

 

[HellinnFrnt]

wow nice

 

[Last Mohecian]

Tiny progress today.  Got the rear seats all boxed in where I cut the holes to clear the front accessories.  All that is left now is to mount them.