Memorial Day weekend 2011 NORTH

sturat

New member
hillbilly68 said:
sturat said:
Spinning an A 7K is some SERIOUS POWER as you know...  crazy.gif

yea i know................and an aggressor A at that..............
I have heard an American Turbine impy acts a size larger also, but i really do not know it that is true or not.
 

hillbilly68

New member
sturat said:
hillbilly68 said:
what hull do you have stu?
1979 Sanger bubble deck

the sanger bubbledeck and eliminator bubbledeck are pretty close to the same design aint they? mines a medium layup, the transom is only approx, 1/2 - 3/4 inch thick.......full stringer no floor
 

sturat

New member
hillbilly68 said:
the Sanger bubbledeck and eliminator bubbledeck are pretty close to the same design ain't they? mines a medium layup, the transom is only approx, 1/2 - 3/4 inch thick.......full stringer no floor
I think they are close for sure.. I have quarter stringer partial floor, was told by Sanger that the bare hull was in the 800Lb range.
 

hillbilly68

New member
sturat said:
hillbilly68 said:
the Sanger bubbledeck and eliminator bubbledeck are pretty close to the same design ain't they? mines a medium layup, the transom is only approx, 1/2 - 3/4 inch thick.......full stringer no floor
I think they are close for sure.. I have quarter stringer partial floor, was told by Sanger that the bare hull was in the 800Lb range.

wow that is heavy.............
 

hillbilly68

New member
sturat said:
hillbilly68 said:
the Sanger bubbledeck and eliminator bubbledeck are pretty close to the same design ain't they? mines a medium layup, the transom is only approx, 1/2 - 3/4 inch thick.......full stringer no floor
I think they are close for sure.. I have quarter stringer partial floor, was told by Sanger that the bare hull was in the 800Lb range.

plus the previous owner said he spent $2k on the bottom and had it straightened and the hook taken out..........
 

sturat

New member
hillbilly68 said:
plus the previous owner said he spent $2k on the bottom and had it straightened and the hook taken out..........
does this person have a boat shop in the dallas area?  :smile30:
 

hillbilly68

New member
sturat said:
hillbilly68 said:
plus the previous owner said he spent $2k on the bottom and had it straightened and the hook taken out..........
does this person have a boat shop in the dallas area?  :smile30:

i drove to yuma az and bought this one, the boat came from cali, tom @ jetboat performance actually owned it at one time, he was the one that told me he saw it run 118 mph
 

hillbilly68

New member
Patchman said:
Sounds like a great hull. What was your other one?

my other one was a 73 wreit 1/4 stringer with a ford 472cid in it, it ran 73 mph on gps at 5300 rpm on pump gas approx 400-550hp, with an A berkeley impy and i setup the pump myself it only had a standard wear ring in it...
 

hillbilly68

New member
TintMan said:
sturat said:
Must have really ran the # then as Tom is a stand up guy.
118? Really? Id have to call tom out on that one...

thats what he told me brotha, the motor was in a different boat, this (my) boat had a 700hp motor in it and they said it ran 92 mph on gps (according to previous owner)
 

Crusader

Moderator
Very nice man!!! Sure was nice hanging with you guys in Okmulgee!!! You guys are a top notch group of guys.
 

hillbilly68

New member
Crusader said:
Very nice man!!! Sure was nice hanging with you guys in Okmulgee!!! You guys are a top notch group of guys.

thanks brotha, it was nice of ya to come up and hang with us, we're just a few good ole boys that like to hangout at the lake and shoot the sh!t and have a few adult beverages..........and mostly talk sh!t about each others boats, but if noticed theres never any hard feelings at the end of the day....................
 
Top