Crusader Project

K

KONA77

New member
Crusader said:
I got the new D0VE-C heads from Bobby today!!

450ed640.jpg
Click to expand...


good deal,  nice redirect... lol
 
Crusader

Crusader

Moderator
blazeracer said:
Cool, get them to the machine shop and get them worked. How much you want for the old yellow ones? Eveything is fixable.
Click to expand...

They're going to the machinist tomorrow. The heads really look good!!! They really just need a good cleaning and a "going through". I'll get him to reseat the valves etc.
 
Crusader

Crusader

Moderator
blazeracer said:
This timing set will mount straight up and be just fine on a cruiser motor.

http://www.summitracing.com/parts/EDL-7830/
Click to expand...

That's the one that has the smog timing take out??
 
B

blazeracer

New member
Crusader said:
blazeracer said:
This timing set will mount straight up and be just fine on a cruiser motor.

http://www.summitracing.com/parts/EDL-7830/
Click to expand...

That's the one that has the smog timing take out??
Click to expand...

They pretty much all do. If you see three keyways it has +4. -4, and straight up. That's a nice chain set for a cruiser motor that's affordable.
 
Crusader

Crusader

Moderator
blazeracer said:
Crusader said:
blazeracer said:
This timing set will mount straight up and be just fine on a cruiser motor.

http://www.summitracing.com/parts/EDL-7830/
Click to expand...

That's the one that has the smog timing take out??
Click to expand...

They pretty much all do. If you see three keyways it has +4. -4, and straight up. That's a nice chain set for a cruiser motor that's affordable.
Click to expand...

Okay, cool. I'll order the set you're recommending....... thanks.
 
Crusader

Crusader

Moderator
KONA said:
i believe thats similar to the one i put one mine  :smile17:
Click to expand...

Okay, cool.

I went to the website and saw that the timing sets are year specific. The set that James posted was for motors 1968-1973.....I'm not sure what year my motor is...... though I do have the 385 series block. Does that matter?
 
Crusader

Crusader

Moderator
yes, D0VE-C heads....

I know this stuff might seem logical and simple to y'all....but us engineer types analyze stuff to death.....trying not to miss a minute detail that'll come back and bit us in the arse later. Know what I mean?
 
K

KONA77

New member
and there is a stamp on the block to identify it's year,  man my memory is getting bad,  but i think it's down by the pan on the back on one side or the other
 
You must log in or register to reply here.
Top