Condor Tx-19

[Disturbed]

clap.gif

 

[customtouch]

Did it come with headers?  Never mind, just saw on the other thread that it didn't.  :smile19:

 

[KONA77]

Ok, after getting it home, and looking at all the parts he gave me....and taking some measurements, Sandy told me straight up, NO Ford.

The bbf is longer, and the back seat has already been moved as far as possible forward for the jetaway.
So:
All mounts already here, polished, and beautiful....pre-mounted on a proven boat....back seat still works....no brainer....gonna be chevy powered.
Stay tuned...lol
Headed to Bay City Saturday to pick up new mill. :smile30:

such a big baby  :smile28:

 

[duanehydro]

Stoked!! Bought a dooley jet pan, windage tray and pickup for $100..... jump.gif
Picked up the XS stainless headers as well.
Now I can sit and track packages...lol

http://www.ebay.com/itm/181243437542?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

[Devilman]

you bought an oil pan with a hole in it?  :grin:

 

[duanehydro]

:smile21:

 

[Patchman]

The drain plug! :smile17:

 

[Devilman]

:smile21:

lol, just fukkn with ya.... :grin: didja go back & look? :cheesy:

 

[duanehydro]

yes! Asshole.

 

[Devilman]

lol, guess its kinda early for those kinds of shenanigans huh... :grin:

You should have it together in no time now.  :smile17:

 

[Patchman]

Don't feel bad, I looked too! :smile23:

 

[Knotty Girl]

When is the big 12/71 blower coming?

 

[73 Sanger Flat]

Glad for you Duane , Can;t wait for you to be back on the water ..

 

[duanehydro]

picked up my new to me building block saturday.  .040 over 454, balanced, with clay smith custom solid roller setup. 10.25 to 1, 049 oval port heads. Got it torn down to the short block.....ordering some parts.....need roller rockers, rings, gaskets, single dominator oval port intake, etc.

Scary part about this motor is it has a cast crank and 3/8 rods.... :smile20:
Hopefully it will be ok until I can build a 496.

 

[73 Sanger Flat]

I got a like new 1250 Marine Dominator I let go for 550.00 .. I paid 600 from EO a couple years ago .. .. I used it maybe 5 hours .. No power valve in it ... If you need it Duane . Might be a little too big for a 462?

 

[73 Sanger Flat]

Sorry - went back a reread your post . You need a intake not the carb . Sorry about that ..

 

[sturat]

picked up my new to me building block saturday.  .040 over 454, balanced, with clay smith custom solid roller setup. 10.25 to 1, 049 oval port heads. Got it torn down to the short block.....ordering some parts.....need roller rockers, rings, gaskets, single dominator oval port intake, etc.

Scary part about this motor is it has a cast crank and 3/8 rods.... :smile20:
Hopefully it will be ok until I can build a 496.

I have a good eagle forged 4.25 crank for 300.00?

 

[sturat]

I also have a team G ceramic coated BBC single 4500 intake for 200?

 

[duanehydro]

Thanks, stu. Right now i'm in a limbo stage. Almost out of money for project, however, I believe I have sold my 67 cougar. As things unfold, I will see which way I'm gonna go.

 

[sturat]

Ok no proble, I have several BBC parts to sell if you or anyone else needs some stuff let me know. I have a few oil pans, couple of cranks, HP iron heads, intake, electric water pump I have a fiberglass scoop the intake and a few other odds and ends.