Broke Boat

Patchman

Patchman

Administrator
Staff member
HellinnFrnt said:
hell I've still got the pump for the Avenger sitting out ....
Click to expand...
Slacker , chop chop! You better have something running for October, when I get up in your hood! :smile26:
 
G

Gold Member

New member
I would just feel bad if I messed your pump up James. My sled will be ready fo sho! You just get your boat to quit trying to make babies patch!
 
H

HellinnFrnt

New member
Patchman said:
HellinnFrnt said:
hell I've still got the pump for the Avenger sitting out ....
Click to expand...
Slacker , chop chop! You better have something running for October, when I get up in your hood! :smile26:
Click to expand...

Oh you'll have the Kona to chase ....  :rolleyes:  You don't want me to bring the Avenger out until next year ... you might have the Porpoise fixed by then ......


think.gif
 
W

WAFOBABY

New member
Bobby if we need to pull and all nighter sat night to get it in Bro Im in. You know me Im a night owl anyways. 
 
W

WAFOBABY

New member
Your right matt unless u are like me and have to detail paint every peace lol lol.  As many times as u have done it in the last year u should have it down to 30min lol jk. 
 
Last Mohecian

Last Mohecian

Administrator
Motor Head said:
I came to the SDBA race to help my cuz with his boat. We are doing good so far.
Click to expand...

Thread on PB said there was  blow over down there today and the driver did not survive.  Did you hear anything about it?
 
G

Gold Member

New member
Picked up my pump last night. I tried to get it installed this evening but a few obstacles got in my way. Its a used pump so its expected. Im still shooting to be on the water sunday.
 
W

WAFOBABY

New member
Im might take my SON to Fort worth races if not what lake you going to go to Bobby.  If I dont go to the races thought about going and hanging out infront of 429 marina  let me know bro.
 
G

Gold Member

New member
Before I tried to bolt the pump in the boat I tried to make sure my bowl would go on it. It wouldn't someone had hit the shaft with a hammer or something and mushroomed it so I had to dress that end of the shaft. Then I prep  the bottom of the pump and intake and put silicone on the intake. When I tried to put the pump in the driveshaft went 1/4 of the way on and stuck! I almost couldn't get it back off. Then I had to clean the silicone off and now I have to dress the splines in the front of the pumpshaft!
 
B

blazeracer

New member
Come on man, get it going!!! I've blown my engine, pulled it, rebuilt it, put it back in and got it running while you been fiddlin with this thing!!!

Just bustin your chops man.. LOL

hurry-up.gif
 
Crusader

Crusader

Moderator
Motor Head said:
Before I tried to bolt the pump in the boat I tried to make sure my bowl would go on it. It wouldn't someone had hit the shaft with a hammer or something and mushroomed it so I had to dress that end of the shaft. Then I prep  the bottom of the pump and intake and put silicone on the intake. When I tried to put the pump in the driveshaft went 1/4 of the way on and stuck! I almost couldn't get it back off. Then I had to clean the silicone off and now I have to dress the splines in the front of the pumpshaft!
Click to expand...

Step away from the project and take a breath!!!

When something like that happens to me, it's so frustrating. I push away from the project, take a breather and then work on it again the next say. For some reason it always works out for me the next day.....not sure why though. lol.
 
G

Gold Member

New member
That's what I did last night. I opened a beer lit a smoke and looked at the shaft then locked the garage and went in the house.
 
You must log in or register to reply here.
Top