Winter Gatherings

[J C Gordon]

Waaaazzzzzuuppppp!!  Hey David you still got a tree down that needs to be cut and split? I need some firewood.... Lets drink a couple and think about it. I'm off not this coming weekend but the next two in row..

 

[J C Gordon]

Hey Randall I need a pre-impeller for my dominator pump!! I know you may have seen one around somewhere or if ya see one let me know.. Thanks.. JC

 

[jdf]

Waaaazzzzzuuppppp!!  Hey David you still got a tree down that needs to be cut and split? I need some firewood.... Lets drink a couple and think about it. I'm off not this coming weekend but the next two in row..

sure do  let me know when is good

 

[badblood]

Anyone planning on going to the san jac for the Byuboyz winter nats?  I am scheduled to be off that week, but I was planning on dynoing my motor that week. Guess I will have to wait and see how that week goes, if it does not rain that week I should be able to get on and off the dyno before the weekend.

 

[Patchman]

We are hoping to have a large turn out. Even if your boat isn't running we will have the busses running.

 

[KONA77]

We are hoping to have a large turn out. Even if your boat isn't running we will have the busses running.

I sure hope those busses have heaters

 

[Patchman]

We are hoping to have a large turn out. Even if your boat isn't running we will have the busses running.

I sure hope those busses have heaters

All we need is a little Peppermint Schnapps! If that doesn't work, I'll be there for you man!

 

[KONA77]

We are hoping to have a large turn out. Even if your boat isn't running we will have the busses running.

I sure hope those busses have heaters

All we need is a little Peppermint Schnapps! If that doesn't work, I'll be there for you man!

as much room as your boat has up under the front,  i guess i can ride under there

 

[Patchman]

It probably wouldn't be half bad up there! The only problem I see is that is where the wife stuffs all her boating crap.

 

[J C Gordon]

Thanks Randall

 

[badblood]

i will be there waiting for ya badblood

  :shocked: Waiting for me? I ll try to get it off the dyno in time to make it.  Ive got some new pump tricks that need to be tested on someone, guess your it.

 

[TintMan]

i will be there waiting for ya badblood

  :shocked: Waiting for me? I ll try to get it off the dyno in time to make it.  Ive got some new pump tricks that need to be tested on someone, guess your it.

well Randall...it is safe to say...You've probably bitin off more than you can chew...unless Santa brought you a truckload of horsepower !  :wink:

 

[J C Gordon]

Hey Keith since your a pump expert what should I try for initial setup. Have 80 youngblood tx19 med layup hull dominator pump with droop and around 900 hp on spray. Been running b cut impeller and bout to order preimpeller , and was thinking bout trying an A or A/B what ya think?

 

[J C Gordon]

Oh and uh Randall, you might wanna research the boats you pick on, Keith has a wicked Tx20! And it's a squirt boat to boot!!!!

 

[3boatpaul]

Oh and uh Randall, you might wanna research the boats you pick on, Keith has a wicked Tx20! And it's a squirt boat to boot!!!!

dam i wish i could be there , but have another deal that has to get done . X-2 jc i have seen that thing run on sever occasion's.  keith has one  wicked fast jet and i know his new motor deal bring's a whole lot more to it.  just saying

 

[badblood]

Oh and uh Randall, you might wanna research the boats you pick on, Keith has a wicked Tx20! And it's a squirt boat to boot!!!!

Tx 18

 

[badblood]

Hey Keith since your a pump expert what should I try for initial setup. Have 80 youngblood tx19 med layup hull dominator pump with droop and around 900 hp on spray. Been running b cut impeller and bout to order preimpeller , and was thinking bout trying an A or A/B what ya think?

What cubic inch motor are you running? And how many rpms can you turn the B impeller? Also what brand impeller?
I like to set em up for a quick et.

 

[J C Gordon]

Sorry Keith thought it was a 20. Running a 482 14.5:1 can turn the B which I think is an American turbine to @ 6400 on motor it's setup tight. Turning 7200 on spray. Looking to setup for quick et not topend like before

 

[badblood]

Sorry Keith thought it was a 20. Running a 482 14.5:1 can turn the B which I think is an American turbine to @ 6400 on motor it's setup tight. Turning 7200 on spray. Looking to setup for quick et not topend like before

Have you dynoed the motor? This info helps to match to pump. Need to know where the motor makes peak torque and hp to make the best impeller choice. With the info at hand I would say it would be quicker with an A and the new style inducer. If you have future plans to go 540ci or larger I would put an AA in it. Give me a call

 

[J C Gordon]

Motor never been dynoed. Me and David where talking bout an A. What is the new style inducer I haven't seen it I don't guess. What about bowl stuffer and bleeder?