Old Buck's Project "Mini Me"

[oldbuck40]

I finally got the rub rail installed! it wasnt as bad as i thought,,,took my time and did lots of measuring and lots of eyeballing :smile23: but i got er done!

on the rear there is a gap,,i left the gap because the pinstriper took some of the stripes too low and they would have been covered up by the rail,,so i just rounded the corners and left it open!

 

[oldbuck40]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

 

[John]

so when are you going to float this thing in your bathtub to check for leaks?  :smile23: :smile23:

 

[sturat]

looking good

 

[NotImportant-1]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

But did you have to leave the used condom laying on the deck?

Really kills a good Pic

:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:






















J/K

Really turning out good Greg :smile15:

 

[sturat]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

Better safe than sorry  :smile24: :smile24: :smile24:



But did you have to leave the used condom laying on the deck?

Really kills a good Pic

:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:






















J/K

Really turning out good Greg :smile15:

 

[NotImportant-1]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

But did you have to leave the used condom laying on the deck?

Really kills a good Pic

:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:






















J/K

Really turning out good Greg :smile15:

:smile23: :smile23: :smile23: :smile23:condom :smile13:lol :smile23: :smile24:

Guess Oldbuck found his bottle of Viagra again


the nurses at the home needs to find a better hiding place again



:smile17: :smile17: :smile17:

 

[John]

i noticed somting shiny in the engine compartment got any pics of that beast of a motor

Looking good!

 

[sturat]

i noticed somting shiny in the engine compartment got any pics of that beast of a motor

Looking good!

Yeah lets see that rice burner :smile15:

 

[oldbuck40]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

But did you have to leave the used condom laying on the deck?

Really kills a good Pic

:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:






















J/K

Really turning out good Greg :smile15:

:smile23: :smile23: :smile23: thats tape on the bow light wires ya old blind bat! :smile23: :smile23: :smile23: :smile23: :smile23:

 

[NotImportant-1]

I think the round'd ends look great with the pin strip "GOOD EYE" :smile15:

lol well it looks like in the pic there isnt anything in the way but there are some blue stripes right close to the black that run further down right in its path so i said F'it and cut em off :smile23: :smile23: :smile23:  yea and i use a hack saw too :smile23: :smile23: thank god for belt sanders and files :smile13: :smile13: :smile13:

But did you have to leave the used condom laying on the deck?

Really kills a good Pic

:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:






















J/K

Really turning out good Greg :smile15:

:smile23: :smile23: :smile23: thats tape on the bow light wires ya old blind bat! :smile23: :smile23: :smile23: :smile23: :smile23:

You know what they say Oldman

Keep doing that and you're going to go blind




:smile23: :smile23: :smile23: :smile23: :smile23: :smile23: :smile23:

 

[oldbuck40]

i noticed somting shiny in the engine compartment got any pics of that beast of a motor

Looking good!

ummm yea somewhere! thats the exhaust canister! 

the engine is just a plain jane 65 horse Suzuki powerhead off of an outboard,,,so i guess you could say its part weed wacker and part salad shooter :smile23: :smile23: :smile23:

 

[oldbuck40]

run nigga nigga run  :smile24: :smile24: :smile23:

lmfao it probably will sound like that!!! it had two baffle plates in the housing right under the engine,,i took em out :smile13:

 

[sturat]

[/quote]lmfao it probably will sound like that!!! it had two baffle plates in the housing right under the engine,,i took em out :smile13:
[/quote]
You can use a folgers can they work well  :smile23: :smile23: :smile23:

 

[Devilman]

ummm yea somewhere! thats the exhaust canister! 

the engine is just a plain jane 65 horse Suzuki powerhead off of an outboard,,,so i guess you could say its part weed wacker and part salad shooter :smile23: :smile23: :smile23:

Just what I figured, fart can exhaust, lol... Think I called that a few pages back... :grin:.

Part weed wakker, part salad shooter, all ricebomb..... I hope you're not planning to cover up that nice paint with a bunch of Japanese performance stickers. Heard you may order a wing for it though?

OB luvs him some Fast & the Furious, lol...


:grin:

 

[sturat]

Just what I figured, fart can exhaust, lol... Think I called that a few pages back... :grin:.

Part weed wakker, part salad shooter, all ricebomb..... I hope you're not planning to cover up that nice paint with a bunch of Japanese performance stickers. Heard you may order a wing for it though?

OB luvs him some Fast & the Furious, lol...


:grin:

Yeah I though i saw one of those "book shelf" spoilers in the back ground  :smile24: :smile24: :smile24:

 

[oldbuck40]

ummm yea somewhere! thats the exhaust canister! 

the engine is just a plain jane 65 horse Suzuki powerhead off of an outboard,,,so i guess you could say its part weed wacker and part salad shooter :smile23: :smile23: :smile23:

Just what I figured, fart can exhaust, lol... Think I called that a few pages back... :grin:.

Part weed wakker, part salad shooter, all ricebomb..... I hope you're not planning to cover up that nice paint with a bunch of Japanese performance stickers. Heard you may order a wing for it though?

OB luvs him some Fast & the Furious, lol...


:grin:

:smile23: :smile23: :smile23: hell Marty may have a wing that would fit it!!! :smile23: :smile23: :smile23: :smile23:

 

[sturat]

MONICAAAAAAA :smile23: :smile23: :smile23: :smile24: :smile24:

MMMIIIAAAAAAAAAAAAA  :smile20:

 

[sturat]

MONICAAAAAAA :smile23: :smile23: :smile23: :smile24: :smile24:

MMMIIIAAAAAAAAAAAAA  :smile20:

ok mybe it was mia :smile23:

Yeah you do not want Domenick to come after you  :smile23: :smile23:

 

[oldbuck40]

Well i was gonna wait and let ya'll see this at Rocky Creek but i couldnt stand it anymore! :smile13: :smile13: :smile13: :smile13: :smile13: :smile13: :smile13: :smile13: :smile13: :smile13: :smile13:


This is the finished wheel and its on the Big Brown truck headed this way!

BIG THANKS to Mike Miller  at    www.truecustoms.com    :smile15: :smile15: :smile15: