Lavon 9/11

Crusader

Crusader

Moderator
Ya, we will be there. We have to leave at about 330pm so I can get Jacob to his weebalo meeting by 530pm. I plan on going over to old Avalon beach and putting in at east fork. My plan is to be there by noon.

You going to come out Gary??
 
O

overbored

New member
I will be there most likely. I just went out for a spin and found out the main ramp at Collin Park is closed because the marina got moved. Power cables are run across the ramp for the time being so we used the dry storage ramp. Hope this doesn't goof up our Wednesday evening get togethers.
 
G

Gem427

New member
Crusader said:
Ya, we will be there. We have to leave at about 330pm so I can get Jacob to his weebalo meeting by 530pm. I plan on going over to old Avalon beach and putting in at east fork. My plan is to be there by noon.

You going to come out Gary?
[/quotE

Yeah we were thinking of comming out since last weekend was so windy.

Gary
Click to expand...
 
B

blazeracer

New member
I doubt I'll be there tomorrow. We'll probably take the boat out on Hubbard. This Maria's moms last weekend here in the US and we have a ton of family up here again. We'll hit up that beach that Matt was talking about last week so the gang drive over and we'll take the boat. After this it's just me, Maria and this kids from here on out.
 
Crusader

Crusader

Moderator
Got the boat hooked up to the truck and getting ready to rill out to east fork ramp because Collin parks ramp is closed. See ya in about 1 1/2 hours.
 
Last Mohecian

Last Mohecian

Administrator
Sharkbit said:
Last Mohican said:
Not sure what we are doing today.  Dawn hasn't been feeling that good all week.  I think it is allergies.
Click to expand...

oh hey I hear they got medicine for that now....
Click to expand...

Yeah... well... You know.  She won't wont go to the doc and OTC ain't working. She been feeling this way since last Sunday.
 
Crusader

Crusader

Moderator
The lake was fantastic today guys. The water was very smooth and Jacob learned how to water ski today, third try and he got up. He only reason he crashed was because he tried dropping a ski so he could slalom. Lol. Kids a natural athelete.
 
Last Mohecian

Last Mohecian

Administrator
Sharkbit said:
tell dawn we said we hope she gets to feeling better
Click to expand...

Will do.

On another note, I lost a 9/16 gear wrench and 9/16 shallow snap-on (might be a craftsman) socket out there at Collin on Wednesday if anyone comes across them.
 
G

Gold Member

New member
Hope to be out on the water with you guys this next weekend! I probably won't rush to be out Wednesday ill just wait until Sunday. Plus I want Matt to be able to try my nozzle with the reducer in it since he didn't get to yesterday.
 
Last Mohecian

Last Mohecian

Administrator
Motor Head said:
Hope to be out on the water with you guys this next weekend! I probably won't rush to be out Wednesday ill just wait until Sunday. Plus I want Matt to be able to try my nozzle with the reducer in it since he didn't get to yesterday.
Click to expand...

He Bobby, I am already convinced I need a droop and to get the nozzle machined for inserts.  I'll get your droop pulled and back to you today so maybe you can come out Wednesday with your boat.
 
B

blazeracer

New member
Is your nozzle already cut for an insert? I have a brand new 3.125" (red) you can try out. I'll bring it Wednesday so you can check it out. I bought if for my E pump, but an E nozzle is 3.125" stock diameter. I need a 3" (purple) for mine.

This insert.. http://www.cpperformance.com/p-900-3-18-red-nozzle-insert-sleeve.aspx
 
Last Mohecian

Last Mohecian

Administrator
blazeracer said:
Is your nozzle already cut for an insert? I have a brand new 3.125" (red) you can try out. I'll bring it Wednesday so you can check it out. I bought if for my E pump, but an E nozzle is 3.125" stock diameter. I need a 3" (purple) for mine.

This insert.. http://www.cpperformance.com/p-900-3-18-red-nozzle-insert-sleeve.aspx
Click to expand...

Mine is not machined yet. Gonna do it as a winter project.
 
You must log in or register to reply here.
Top