Interior help??

[waterwalker]

Not a hot boat by any means but we need a decent upholstery person for seats on the ski-boat. Nothing super fancy....just an older Century ski boat in need of TLC so it will look decent next year.

Any names #'s will be appreciated.

 

[spd500]

I have always used Pasadena Auto Upholstry , but it's probably a little far for you .

 

[waterwalker]

I guess your talking about the shop in Cali. Maybe not too far-just don't want to pay the luggage fees on airlines for all the cushions.

Got one close to Dallas, Texas??  :smile24:

 

[Crusader]

I guess your talking about the shop in Cali. Maybe not too far-just don't want to pay the luggage fees on airlines for all the cushions.

Got one close to Dallas, Texas??  :smile24:

I believe Blazeracer used Browns boat repair / upolstry  in Mesquite for his interior and the guy did a fantastic job for a very resonable price.


http://www.brownsboatrepair.com/

 

[waterwalker]

Thanks-prefer leads than blind shopping.

 

[WAFOBABY]

Dont act like you cant or dont know how to do it.    If you take is somewhere its prob going to cost ya around 1200 to 1500.00  there is a guy on 276 just out side of Rockwall I talked to about fixing my Cover to go over my HUGE scoop now and he was doing a wakeboard boat and it loooked pretty good..    Call me and we can go out there but he is going to want to see the boat in person...

 

[blazeracer]

I guess your talking about the shop in Cali. Maybe not too far-just don't want to pay the luggage fees on airlines for all the cushions.

Got one close to Dallas, Texas??  :smile24:

I believe Blazeracer used Browns boat repair / upolstry  in Mesquite for his interior and the guy did a fantastic job for a very resonable price.


http://www.brownsboatrepair.com/

I used Browns in Mesquite. My entire interior was $1,374.78 out the door and the quality is TOP NOTCH. Well, you saw it at Tawakoni. That included the side panels, gunwhale pads, gear shift panel, two bucket seats, the rear bench seat, and two battery box covers. And it's all tuck and roll.

 

[spd500]

No , Pasadena Tx  :smile30:

 

[waterwalker]

No , Pasadena Tx  :smile30:

That's a little closer, yet I still woudld rather find one around DFW. Thanks

 

[waterwalker]

Dont act like you cant or dont know how to do it.    If you take is somewhere its prob going to cost ya around 1200 to 1500.00  there is a guy on 276 just out side of Rockwall I talked to about fixing my Cover to go over my HUGE scoop now and he was doing a wakeboard boat and it loooked pretty good..    Call me and we can go out there but he is going to want to see the boat in person...

"Can't or don't know how" is not the issue. Seems like my saddle bags stay full and every time I think they might get emptied something else jumps in for me to take care of. Hell- every friggin weekend is filled up between now and Dec 3. AND the holidays have not even started. So I might have to get it done elsewhere. Jasson, does any one you know seen the work of "Route 66 Upholstery"?
I think that is the name. They are on Hwy 66 by the locksmith.

 

[burn504]

Here is the best upholstery place I have found. Hole in the wall shop here in Grapevine. Moreno Custom Upholstery.

He did all my seats and my father in-laws Century Cheetah for well under $1000. He also posts discounts on his Facebook so check there first and maybe get 10% off.

His name is Ricardo Moreno
here is his card:

 

[Last Mohecian]

Jasson, does any one you know seen the work of "Route 66 Upholstery"?
I think that is the name. They are on Hwy 66 by the locksmith.

Are you talking about the place in Rowlett?  I had them put the cover on my 72 a few years back.  They did a good job but there really wasn't much to it.  That place has been there a ling time.  I have seen a couple of nice cars done from there.

 

[blazeracer]

Jasson, does any one you know seen the work of "Route 66 Upholstery"?
I think that is the name. They are on Hwy 66 by the locksmith.

Are you talking about the place in Rowlett?  I had them put the cover on my 72 a few years back.  They did a good job but there really wasn't much to it.  That place has been there a ling time.  I have seen a couple of nice cars done from there.

if it's the 1 by the locksmith on 66 they dont do boats. that was the first place I took mine, and he sent me to browns.

 

[WAFOBABY]

I have seen that place but havent seen his work.  I can ask Craig who is uses for all his custom cars and bikes he builds but.  I would ck that place out on the way to my house on 276 I told ya about.  Ive seen his work and its pretty dam GOOD.  And from me talking to him for about 45 min about my cover being redone to fit over my SCOOP he seems to know his stuff.

 

[blazeracer]

I have seen that place but havent seen his work.  I can ask Craig who is uses for all his custom cars and bikes he builds but.  I would ck that place out on the way to my house on 276 I told ya about.  Ive seen his work and its pretty dam GOOD.  And from me talking to him for about 45 min about my cover being redone to fit over my SCOOP he seems to know his stuff.

When I was in there asking him if he did boats he was working on a 50's pickup tuck and roll seat job. It looked real damn good, but like I said, he doesn't do boats.