Hardin Marine Cheyenne

B

blazeracer

New member
LS oil pan comes with a pressure port blocked off. Just gotta bolt on the fitting and tap a drain back.  :smile16:

Prolly gonna run a single big hair dryer. Maybe not though. IF I run the two pipes up and over for now, I can figure out one or two later. Hmmm
 
B

blazeracer

New member
Got a bunch done over the weekend.

Got all the wiring figured out to go from old MSD-6AL to MSD-6LS and MSD box installed.

Got the fuel system all the way to the regulator installed.

Pump is back together.

Stainless steel extensions are tack welded onto the headers.

Coils are relocated to under the headers.
 

Attachments

  • backend1.jpg
    backend1.jpg
    127.2 KB · Views: 111
  • backend2.jpg
    backend2.jpg
    137.1 KB · Views: 109
B

blazeracer

New member
Lake test NO LATER THAN in two weeks. Dial in the nitrous at Wright Patman with Choppy and Outlaws. May 3rd be in Hugo killin rats.
 
Crusader

Crusader

Moderator
Great news james!!

Hey man, think you can post up the detailed photos and work you did this weekend that was posted up over on a$$book?
 
B

blazeracer

New member
Pump brace installed, tied up some more wiring, picked up the driveshaft from Mesquite Driveline today. Had it lengthened 2-3/8" and spin balanced. Still gotta finish up the plumbing for the water and then get the motor back in.
 
B

blazeracer

New member
Wasn't happy how the pump looked, so took it apart, repainted it, polished the ride plate, and put it back together. This time with antisieze on everything. Still gotta polish the ride plate support and put it back on.
 
B

blazeracer

New member
Polished the front motor plate and got the water lines and alternator on. Fixed the carpet on the stringers, got the bleed though out and carpeted the inside if the underseat storage compartment. Fixed all the wiring behind the dash and got the depth finder installed.
 
B

blazeracer

New member
Last Mohican said:
http://www.performanceboats.com/parts-sale/217122-single-turbo-ls-5-3-hyd-roller-cam-sale.html  think.gif
Click to expand...

Tom told me about his cam for sale the other day. When I do go turbo it will be with T73 twins.
 
Last Mohecian

Last Mohecian

Administrator
blazeracer said:
Last Mohican said:
http://www.performanceboats.com/parts-sale/217122-single-turbo-ls-5-3-hyd-roller-cam-sale.html  think.gif
Click to expand...

Tom told me about his cam for sale the other day. When I do go turbo it will be with T73 twins.
Click to expand...

Cool.  Just remembered reading this post and thought that cam would be a nice fit and a good price.

blazeracer said:
LS oil pan comes with a pressure port blocked off. Just gotta bolt on the fitting and tap a drain back.  :smile16:

Prolly gonna run a single big hair dryer. Maybe not though. IF I run the two pipes up and over for now, I can figure out one or two later. Hmmm
Click to expand...
 
B

blazeracer

New member
Front half of the boat is DONE. Front seats are bolted back down. Even the fire extiguisher is installed. Back seat is still sitting in there loose so I can take it out for the initial shake down runs. Motor's back in and about half wired.
 
C

ChryslerJet

New member
blazeracer said:
Front half of the boat is DONE. Front seats are bolted back down. Even the fire extiguisher is installed. Back seat is still sitting in there loose so I can take it out for the initial shake down runs. Motor's back in and about half wired.
Click to expand...
Nice job James keep it going.
 
Y

YMeLord

New member
Man that thing looks good. James is a "MOCHINE" ... really like the idea of the extra storage in the back seat utilizing the drop in the center pod. Great thinking on that one.
 
You must log in or register to reply here.
Top