Last Mohecian
Administrator
blazeracer said:
Yes.
Enforcer Project renamed, Junk Yard Dog.
- Thread starter blazeracer
- Start date
Yes.
blazeracer
New member
Thanks to Kona and Diamond Jim I got the motor mounts, starter and some gauges bringing the total up to $1,100 spent so far.
Unfortunately with the Glastron motor going south this one's a hold for a short while.
Unfortunately with the Glastron motor going south this one's a hold for a short while.
blazeracer
New member
I'll be pulling it apart this week and will post up what the deal is. I do have the Enforcer's running motor here for in waiting if need be. Might could put the SCJ heads on that old Lincoln motor with that big Lunati cam and get her wet again real quick.
blazeracer
New member
OK, well the motor for this project is now running in the Glastron so I have to find a new one. I did get seats yesterday from Wafobaby. Thanks Jason. I guess I now know what paint color scheme I'm gonna use. Subtracting the motor and rebuild kit which are now in the other boat and adding the seats the running total should be around $1,125 so far I think.
The nice part is these are ready to bolt in. I don't have to do anything to them.
The nice part is these are ready to bolt in. I don't have to do anything to them.
Np James glad it worked out for the both of us the seats look good in the Enforcer. So what is the paint scheme going to be like? Im sure most of the boat is going to be white what about the rest or is that some of the SHHHHHH stuff? think.gif I know you said they are ready to be mounted in. But if you need any aluminum angle to mount the back seat or front for more support just let me know.
blazeracer
New member
WAFOBABY said:
White, then stripe is to match the seats. Keeping is simple. No flake on this one.
C
CorDog009
Guest
I bet a paint scheme like my old Eliminator would match almost perfect.
blazeracer
New member
CorDog009 said:
Wow, that's just what I was thinking of doing to it. Where's that boat now? If it's anywhere around here I'll have to go another direction. Maybe same scheme but reverse the colors and put two stripes up the front.
C
CorDog009
Guest
A guy in Texarkana bought it 2 years ago but painted it solid white last year.
blazeracer
New member
Test fitted some hardware today.
Gold Member
New member
Looks good James!
blazeracer
New member
Motor Head said:
You and Shannon come over for the party next Saturday night and you can check it out in the driveway!!
The motor's in there with the Glastron's bell housing. That one's not going to work in this boat because the pump mount is a different size. Maybe because it's an E pump?. I have another I got from Kona I'll try next. If that doesn't work I have another I got from Diamond Jim that mounts to the stringers that will work for sure. Diamond Jim's mid mounts are going to work fantastic.
blazeracer
New member
KONA said:
I thought they were all the same too. Mine came from an E, and I know yours was a C/G. I'll investigate this more today.
Ha, a little online checking revelaed this...
http://www.californiamarine.com/part_details.asp?category=Berkeley+Jet+Drive&subcategory=Bearing+Cap&partnumber=SC4007
I'll see if there's one on the Glastron.
blazeracer
New member
Looked it up on the American Turbine parts charts. The AT bearing cap is part number SC2007 on ALL Berk pumps. Learned something new today.