denton/lake dallas

Wakemaker

Wakemaker

Member
Never seen that boat out there last year, and I went out a lot on Lake Dallas last year.  Nice looking boat!
 
S

slow67

New member
Wakemaker said:
Never seen that boat out there last year, and I went out a lot on Lake Dallas last year.  Nice looking boat!
Click to expand...

I've only seen it at eagle mountain at the tie up.
 
H

hillbilly68

New member
Wakemaker said:
Once you get faster than the jon boats then you can work on outrunning wave-runners.  :smile26:
Click to expand...

if i cant out run them then god forbid if they ever come up behind me  :smile18: lol :smile16:
i'm hopen for somewhere around 60 mph out of it :smile29:
 
Wakemaker

Wakemaker

Member
hillbilly68 said:
if i cant out run them then god forbid if they ever come up behind me  :smile18: lol :smile16:
i'm hopen for somewhere around 60 mph out of it :smile29:
Click to expand...

That is one good thing about a squirt boat. lol  :smile17:
 
H

hellnback

New member
with all the measurements in and all it's really a 474.99 ci with 11:1 compression I'm thinnin I need a tunnel ram and headers to make it really work. Had the machine shop open up the oil drains in the heads so I can keep more oil in the bottom. Still have to get a new timing cover on monday old one is really pitted. Should be all back in by wednesday or thursday with luck and no rain.
 
H

hillbilly68

New member
well heads are done finally, they shaved 10 thousants off them, block should be done tomorrow bored .060, with 10.1 flattops going in it, 10.1 pistons & shaving 10 thousants off heads outta give me a nice compression motor right where i want it. if all goes well i'll have it in the water saturday afternoon or sunday morning to get the cam broke in..... :smile28:...... :smile17:..............
 
H

hillbilly68

New member
well guys here it is, minus the oil pump since summit sent me the wrong one, i got the right one ordered, i'm going back up next week to install it and drop it it and get the cam broke in........


 

Attachments

  • new engine.bmp
    1.4 MB · Views: 96
H

hillbilly68

New member
TintMan said:
Seems to always be something! Good luck with the new motor! :smile17:
Click to expand...

yea TintMan, you know you spend lots of time and money  :smile13: getting all your parts ordered and gathered up then check your list 2-3 times to make sure you have everything & something as stupid as that happens, needless to say i wasnt a happy camper saturday  :smile15: i even called every parts store in that area but no one had one
 
H

hillbilly68

New member
TahitiRat said:
Looks good David. bring it back here and lets go to the lake
Click to expand...

as soon as it gets dialed in i will brotha, just hope i can keep up with yall, yall will have to stop for a beer break about every couple miles to let me catch up
 
You must log in or register to reply here.
Top