1985 Liberator Tunnel

J

jdeaton

New member
1985 Liberator tunnel, needs your motor, have Chevy and Ford 4 point mounts and Headers.  $5000.00  979-451-3609
 
J

jdeaton

New member
If I recieve an intrest in the boat without motor, I will sell her without motor.  I pick the new motor up next Friday, which increases the price for a turn-key deal, but I can always put the new motor in my day cruiser.  Soooo if the members want it, she is for sale.

And yes Knotty there is something up my sleeve. :smile17:
 
B

boatlessbrett

New member
Is it a 19 or 21 and what kind of lay up? Would you consider any trades?  What kind of pump? Sorry I haven't read your project thread yet but will try to get to it tonight if the interwebs is back up and running when i get home hard to do over lunch on iPod.
 
J

jdeaton

New member
19, Lake layup, No Trades, with or without 460 Ford, have 4 point mounts, drive line and Headers for Chevy or Ford. You really need to read the build site to see what's what.
 
B

boatlessbrett

New member
Ok I read the whole project thread lots of problems with the ford sorry bout that they can be bada$$ motors with the right pocket book. I will stick to cheap Chevys as mine is doin fine with 495 hp and 89 octane. But still have questions about the pump is it fresh, what impeller, place divertor? It sounds like it's ready to plug and play as you have done the hard work.
 
B

boatlessbrett

New member
I saw that in the build very nice work much better than I could do. I wonder if I could get enough for mine without the motor for this to happen will be getting my eBay on tonight.
 
J

jdeaton

New member
I am putting the stock Ford, I had built for plan B, in the Liberator.  This probably won't be finished until after Somerville, (mid August) The Liberator will be For Sale until the Roller Ford goes in the machine shop.  Should be plenty of time to see if yours will sell and for me to answer all the questions conserving the boat.  I plan on pulling the pump as early as next week.  depends on the Honey Dooos list.
 
C

ChryslerJet

New member
DiamondJim said:
I am putting the stock Ford, I had built for plan B, in the Liberator.  This probably won't be finished until after Somerville, (mid August) The Liberator will be For Sale until the Roller Ford goes in the machine shop.  Should be plenty of time to see if yours will sell and for me to answer all the questions conserving the boat.  I plan on pulling the pump as early as next week.  depends on the Honey Dooos list.
Click to expand...
So Jim you bringing out the Cadillac to Somerville (RTC)?
 
J

jdeaton

New member
Unless I have some unbelievable good luck, putting the Ford together and getting it stabbed in the boat, Ill be there in the Glastron.
 
You must log in or register to reply here.
Top