Tinbender71
New member
Yes sir, I did change the plumbing, the temp came up to about 150, mind you its taking reading from line dumping into riser. Manifolds stayed even temp, and you could touch them.
We just checked the steering again, it seems tight with no play. The rudder is not centered behind the prop, dont know if it matters?
It has a large fin under the boat, not like the small ones I have seen in pics of v-drives over the years. It is actually lower than the prop.
The prop and the fin both look straight to me.
We just checked the steering again, it seems tight with no play. The rudder is not centered behind the prop, dont know if it matters?
It has a large fin under the boat, not like the small ones I have seen in pics of v-drives over the years. It is actually lower than the prop.
The prop and the fin both look straight to me.