vdrivegrimes
New member
GM TRW FORGED 396ci pistons casting#3881456 also comes with rods. 300obo
---------------
BME forged pistons 509ci 14.1cr
dont know anything about them other than they are stamped BME 92 on the bottom side. they are gas ported. bill miller engineering pistons. make offer. was told they were in a 502ci that was bored. went to a smaller dome. make me an offer.
http://www.bmeltd.com/
---------------
i have a chrome imco saddle tank, im guessing its an 11 gal tank. comes with brackets.
want to trade for t-tank with brackets.
-----------------
moon speed disc wheel covers, fits 15in steel wheels. no dents, some small sratches from being stored.
80obo
----------------
thick tall alum BBC valve covers with flames milled into them. needs polishing.
will trade for the cheap fabricated valve cover or sale for 80obo
-----------------
very low hours, starts right up. has a ton of carb and tuning work. set up for a 165lb rider. widend a-arms and axle. lowered, beadlock wheels. elka long travel shocks front and rear. geared. curtis sparks full exhaust.
4500obo
before the graphics and wheels
-------------------
pretty clean lowered chevy swb. very $$$$ drop kit, ride smooth and low, no rubbing issues. no a/c truck but has heater. all original except motor is a later model roller motor.
4500obo
will trade for a turn key BBC, BBC parts, v-drive stuff or anything drag boat related. would really like a 671 or 871 blower with carbs and manifold.
--------------------
i have a fairly clean 97 chevy dually with a 454 and auto trans.183,000 miles. it drinks the gas, 13-15mpg. its a 2wd and lowered about 4in. pulls heavy trailers great. has pretty new 10ply tires on nice REAL alcoa wheels. its a blue interior truck with 2nd row bucket seats. all power. looks great, factory radio/cd. in
truck has its normal dents and dings, it was a work truck. truck looks killer rolling down the road and from 5ft.
i might trade, could really use the money to finish up my new boat.
trade for a v8 2000 up new body style chevy
8-71 blower, complete with carbs(or injection) and manifold for BBC
flat bottom drag boat
---------------
BME forged pistons 509ci 14.1cr
dont know anything about them other than they are stamped BME 92 on the bottom side. they are gas ported. bill miller engineering pistons. make offer. was told they were in a 502ci that was bored. went to a smaller dome. make me an offer.
http://www.bmeltd.com/
---------------
i have a chrome imco saddle tank, im guessing its an 11 gal tank. comes with brackets.
want to trade for t-tank with brackets.
-----------------
moon speed disc wheel covers, fits 15in steel wheels. no dents, some small sratches from being stored.
80obo
----------------
thick tall alum BBC valve covers with flames milled into them. needs polishing.
will trade for the cheap fabricated valve cover or sale for 80obo
-----------------
very low hours, starts right up. has a ton of carb and tuning work. set up for a 165lb rider. widend a-arms and axle. lowered, beadlock wheels. elka long travel shocks front and rear. geared. curtis sparks full exhaust.
4500obo
before the graphics and wheels
-------------------
pretty clean lowered chevy swb. very $$$$ drop kit, ride smooth and low, no rubbing issues. no a/c truck but has heater. all original except motor is a later model roller motor.
4500obo
will trade for a turn key BBC, BBC parts, v-drive stuff or anything drag boat related. would really like a 671 or 871 blower with carbs and manifold.
--------------------
i have a fairly clean 97 chevy dually with a 454 and auto trans.183,000 miles. it drinks the gas, 13-15mpg. its a 2wd and lowered about 4in. pulls heavy trailers great. has pretty new 10ply tires on nice REAL alcoa wheels. its a blue interior truck with 2nd row bucket seats. all power. looks great, factory radio/cd. in
truck has its normal dents and dings, it was a work truck. truck looks killer rolling down the road and from 5ft.
i might trade, could really use the money to finish up my new boat.
trade for a v8 2000 up new body style chevy
8-71 blower, complete with carbs(or injection) and manifold for BBC
flat bottom drag boat
He's not on here much, just every now & then, but I'll give him a heads up on FB.