SOME PARTS FOR SALE ON HOTROD GOSSIP PAGE.
Ernie
[Edit] Date Posted: 22:01:23 06/18/09 Thu
I have two pairs of Gen VI rect port heads off Marine 502's. 2.25 x 1.88 valves. Heads will need to be cleaned and valve job. These heads only work on Gen VI blocks, maybe Gen V's... but not sure. Springs are for hyd roller and have about 130 hours on them. These are nice flowing heads for stockers and they aren't made anymore. Casting #088 $550/pair
Gen VI Chevy steel crank, 4.0 stroke, mag'd and good to go. Polish and install. $400
I also have two dart manifolds for above heads. Water necks have some corrosion, but never leaked. Manifolds come with 1/2" spacer and studs. $125/ea
(2) Holley 800cfm carbs, just rebuilt. Dual 50cc pumps. They are marine carbs, but could work on anything. $250/ea?
Email for info at niceguyyy01@aol.com
Ernie
[Edit] Date Posted: 22:01:23 06/18/09 Thu
I have two pairs of Gen VI rect port heads off Marine 502's. 2.25 x 1.88 valves. Heads will need to be cleaned and valve job. These heads only work on Gen VI blocks, maybe Gen V's... but not sure. Springs are for hyd roller and have about 130 hours on them. These are nice flowing heads for stockers and they aren't made anymore. Casting #088 $550/pair
Gen VI Chevy steel crank, 4.0 stroke, mag'd and good to go. Polish and install. $400
I also have two dart manifolds for above heads. Water necks have some corrosion, but never leaked. Manifolds come with 1/2" spacer and studs. $125/ea
(2) Holley 800cfm carbs, just rebuilt. Dual 50cc pumps. They are marine carbs, but could work on anything. $250/ea?
Email for info at niceguyyy01@aol.com