EDELBROCK HEADS NEW

[EOSpeed]

I HAVE A NEW SET OF EDELBROCK PERFORMER RPM HEADS OF 1600.00.      817 996 4431

 

[EOSpeed]

IF NO ONE WANTS THE HEADS I AM GOING TO PUT THEM ON E- BAY.
                                                                      :smile19:

 

[73 Sanger Flat]

I looked at these heads Monday . They are nice .. Wish they would work on my 598 , I would get them ..

 

[jimsplace]

I HAVE A NEW SET OF EDELBROCK PERFORMER RPM HEADS OF 1600.00.      817 996 4431

Those are nice heads.
If anyone is considering an upgrade, they are well worth the price.

 

[Michael Swindoll]

Damn those would be awesome on my scarab!  jump.gif

 

[scarabscs]

Damn, these would be awesome on my scarab  :smile17:

 

[EOSpeed]

1480.00 THAT IS MY COST. BUY THEM OR I WILL PUT THEM ON THIS 439 I AM BUILDING.
                                                          :smile17:

 

[boatlessbrett]

If you can wait till next week I would like to come by Monday and check them out.

 

[FL350]

Whew! That's a deal right there.

 

[EOSpeed]

I WILL BE HEAR. GIVE ME A CALL.
                                                        :smile17:

 

[duanehydro]

EO, are theses heads still available, and what spring pressure are they set for?

 

[EOSpeed]

DUANE I SOLD THEM. WHAT ARE YOU LOOKING FOR? I HAVE SOME MORE.
                                                                      :smile17:

 

[duanehydro]

looking for small port (462 motor) either oval ports or small req. ports, setup for solid roller .660 Lift, aluminum
Eyeballing the Brodix ovals...

 

[EOSpeed]

118 CC CHAMBER
315 CC INTAKE
110 CC EXHAUST
2.25 INT. 188 EXH
185 LBS @ 1.95 465 LBS @ 1.375  COIL BIND 1.15
SAME HEAD THAT GM PUT ON THE 572 RATED AT 620 HP.
1780.00

 

[EOSpeed]

ALL OF THE GM STUF HAS BEN CUT OF.

 

[duanehydro]

What are your thoughts on these versus an oval port 280 brodix heads on a 462" motor? think.gif
Seeing as how it's probably only gonna turn 5600-5700?

 

[EOSpeed]

HOW MUCH DURATION DO YOU HAVE @ .050. WHAT IS THE C.L. INTAKE MANIFOLD, COMPRESSION RATIO.
                                                                                  :smile17:

 

[duanehydro]

10.2 w/119, 660 lift 264/264 dur @.050 clay smith roller. Cut on 108. Shootout 4150 single plane w/dominator adapter 1050cfm holley

 

[duanehydro]

Also, Eo, this is my only ride....My wife and I will be cruising this thing everywhere...god willing..so throttle response/midrange/cruise is important, as well as a lil' top end from time to time... :smile16:

NOT a race boat. :smile28:

 

[EOSpeed]

WITH THAT MUCH CAM THE BRODIX 280 WILL BE THE BEST. WITH YOU COMBINATION IT WILL MAKE 600 HP @ 6000. THE 108 C.L AND THAT MUCH DURATION IT WILL LIKE GAS. I THINK A CAM AROUND  250 D. AND 112 OR114 C.L. FOR CRUSING. JUST MY THINKING.
                                                                        :smile17: